Fuel and fluid tools for vehicle servicing, including fuel pressure testers, injector tools, engine leak testers and drum pump kits. Mechanics can browse by the service task, comparing the stated vehicle, engine and fluid applications alongside adaptor formats and kit contents before selecting equipment.
Showing 97–120 of 139 resultsSorted by popularity
Injector seal puller for removing diesel fuel injector copper washers and seals, with a slim shaft, threaded conical tip and slide hammer action for stuck washers.
5-piece drain valve plug set for Ford 6.7L diesel HFCM fuel pump systems, suitable for 2017-2022 F250, F350, F450 and F550 models.
Balance shaft fitting kit for Jaguar and Land Rover AJ200 2.0 diesel engines, used for removal, refitting and correct setting during servicing work.
Plastic AdBlue fuel dispenser nozzle with 3/4in connection and 5-60Lpm flow rate, suitable for clean fluid transfer in garages, workshops and vehicle servicing.
7-piece quick disconnect fuel line tool kit also covering air conditioning fittings, with clips for compatible pipe sizes from 1/4in to 7/8in.
6pc injector puller set for removing common rail injectors on Mercedes CDI OM611, OM612 and OM613 engines without dismantling the cylinder head.
18-piece injector remover, puller and installer set for VAG FSI petrol engines. Used for injector service work on VW, Audi, Seat and Skoda models.
BMW and MINI fuel injector tool kit for selected B38 and B48 petrol engines, used to remove and refit plastic-bodied injectors with less risk of damage.
Injector tube seal installation tool for DV6 1.6 16V diesel engines, used to fit the seals neatly during servicing and repair work.
Rigid replacement spout and vent kit for water jugs, supplied with spout, cap, replacement vent, secondary base cap and flame arrestor for cleaner pouring.
15pc fuel injector removal and refitting tool kit for VW, Audi, Seat and Skoda FSI engines, with puller, slide hammer and fitting tools for service work.
9L engine oil extractor pump using compressed air to create a vacuum, with three nylon suction probes for access into narrow or awkward areas.
Manual fluid transfer pump with a 1300mm hose for moving fuel, oil and water between containers or during garage, workshop and home maintenance.
230V wall-mounted electric diesel transfer pump for refuelling vehicles or machinery from drums or small containers, with hoses and an auto nozzle.
Truck diesel injector extractor set for Volvo, Scania, Mercedes, MAN, Renault and IVECO, supplied with key puller components for injector removal work.
109mm 8-rib fuel filter wrench with 3/8in drive for Peugeot, Citroen and Renault models. Used for removing and refitting fuel filter caps during servicing.
155mm 12-rib Volvo fuel tank lid remover with 1/2in drive, used for removing and refitting fuel filter caps during servicing work.
Adjustable fuel tank lid remover with 1/2in drive for removing fuel pump and sender unit retaining rings on a wide range of European and Japanese vehicles.
20L fuel can in green metal for diesel or petrol, supplied with a pouring spout and bayonet cap closure for cleaner filling and secure transport.
Fuel injection pump sprocket tool for Hyundai and Kia 2.0 and 2.2 CRDi diesel engines, used to pull the high pressure fuel pump sprocket during timing work.
429-piece diesel injector seat cleaning kit with brushes, swabs, rigid and flexible extensions and 1/4in drive hex shaft for port, bore, cup and shaft cleaning.
10L petrol can made from HDPE, also suitable for diesel, with a transfer spout and top handle grip for controlled pouring, carrying and tipping.
3-piece diesel injector bore cleaning brush set for removing carbon and debris from injector bores, sleeves, ports and seats before refitting.
220L plastic diesel fuel tank with a 12V pump giving 40 L/min and a 4 m hose with automatic tap valve, made to fit between the wheel boxes on a pickup loading area.
Jerry can options in 5L, 10L and 20L for petrol and diesel, from green petrol jerry can and black diesel jerry can ranges with auto shut-off nozzles to plastic cans with spouts and a 20L metal can. For moving fuel there are manual siphon pump kits, jiggle siphon heads, a battery powered syphon pump, 12V diesel fuel transfer pump options, wall mounted diesel pumps and drum and IBC pump kits, including AdBlue pump kits with flow meters.
Diesel and petrol injector puller kits cover VAG, BMW, Mini, Ford, Mercedes CDI, Fiat, Iveco and Volvo engines, with injector seat cleaning kits and Volvo FM12 sleeve tools. Fuel line disconnect tool sets, fuel tank lid removal tools and hose clamp pliers help with fuel system repairs, while a head gasket tester and antifreeze refractometer check the cooling system. Plastic funnel sets and fluid extractors complete the range.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy