Showing 5689–5712 of 6742 resultsSorted by popularity
102mm bi-metal wood hole saw with a 38mm maximum cutting depth, suitable for cutting wood, plastic and metal during electrical, plumbing and mechanical work.
85mm magnetic socket extension bar with 1/2in drive, made to hold nuts and bolts in place during fitting for easier garage, workshop and repair work.
15kW propane LPG space heater with 51,000 BTU maximum heat output, 230V power and 580 cubic metres per hour airflow for garages, workshops and factories.
12-piece centre punch set with taper punches, a 3/8in pin punch and chisels for marking drill points, alignment, pin removal and workshop shaping.
Yellow and black adhesive tape for marking floor hazards, walkways and storage zones, supplied on a 50mm x 50m roll for workshops and warehouses.
Red and white adhesive tape for hazard and floor marking, supplied as a 50mm x 50m roll with a 0.07mm thickness for walkways and work zones.
65mm hub socket with a 3/4in drive and 12-point profile, made from chrome vanadium steel for compatible hub nuts during servicing and repair work.
Five 19mm rolls of black, blue, red, green and yellow electrical tape in flame retardant PVC, for insulating and marking cables.
10-piece 3/8in drive metric universal joint socket set with wobble action, 10-19mm sizes and chrome vanadium construction, supplied on a storage rail.
4-piece 3/8in drive chrome vanadium set with 14mm, 16mm, 18mm and 21mm spark plug sockets and universal flexi joint access for removal and installation.
10-piece 3/8in drive metric deep socket set with wobble joint sockets in 1019mm sizes, made from chrome vanadium steel and supplied on a storage rail.
2100W 230V concrete breaker hammer with 85J impact energy and a 1600 bpm rate, supplied with point and flat chisels for concrete and masonry removal.
18V cordless rivet gun for 3/32in to 3/16in pop rivets, supplied with a 4.0Ah Li-Ion battery and 18V charger for workshop, garage and site use.
Auto darkening welding mask with a 100 x 60mm viewing area, shades 9-13, Arc, TIG, MIG and grinding modes, solar power and replaceable battery backup.
Three 1/2in drive socket set extension bars in 75mm, 125mm and 250mm lengths, made from chrome vanadium steel with sprung ball ends for secure socket retention.
Double-ended tyre valve screwdriver for short and long valves, also suitable for use as a socket cap driver on cars and vans.
3-piece 1/4in drive socket extension bar set in chrome vanadium steel, giving extra reach for awkward fixings during garage, workshop and DIY jobs.
Petrol jack hammer with a 52cc 2.4hp 2-stroke engine and 38mm fitting, supplied with flat and pointed chisels for concrete, brick and block breaking.
28mm trailer pin for compatible tractor, carrier and towing fittings, supplied with a lynch pin and chain to keep the retainer attached.
18+ ID check8-piece VDE insulated tool set with 1000V protection, including pliers, side cutters, screwdrivers, open end spanners and a cable knife for electrical work.
12-piece 3/8in drive extra shallow magnetic metric socket set with sizes 8-21mm and storage rail for tighter access during garage, workshop and repair jobs.
6-piece Allen hex key set with 1000V VDE insulation and extra-long 2.5-8mm keys for electrical servicing, hybrid vehicle work and restricted access.
Universal V-shaped ladder stand off in heat treated aluminium, with rubber feet for positioning against walls, corners and downpipes.
18+ ID checkGrafting knife with a stainless steel blade and treated wooden handle, used for clean cutting on shrubs, trees and small branches during grafting work.
Cookies on ToolBuyer
We use essential cookies to make the website work. With your permission, we also use analytics cookies to understand how it is used, and marketing cookies and similar tools from Google and Meta (Facebook and Instagram) to measure adverts and show adverts based on your visits and shopping activity. You can reject optional cookies or change your choices in Cookie settings. Cookie policy